Transparent PC Material
It is made of PC material. Even if the material cost is relatively higher than others, the aesthetics is maximized in appearance. It should be a masterpiece of industry, elegant and graceful.

Pressurized Shower Working Principle
There is an energy-saving pressurized water inlet device designed at the end of the shower and communicates with the venturi hole of the shower handle. When water enters the shower, the outside air pressure forces the water flow to speed up the water, thereby improving Approximately 30% of the water outlet speed, which has the effect of 30% automatic pressurization. When the water flow continues to pass, the air is continuously drawn in from the venturi hole. The water flow is rich in oxygen ions. When inflated, there will be a little water flow and air. The sound of colliding with each other; when the water jet is ejected from the water outlet sheet, oxygen ion bubbles occupy the internal space of the water jet, and the flow rate of the outlet water is reduced by about 50% compared with the original, which can automatically save water by 40%; when the water jet hits the skin of the body On the surface, oxygen ions automatically explode to increase shower coverage, play aerobic massage, promote blood circulation, and achieve health benefits.

Stone Bead Filter
All-natural bioactive stone beads purify the water.  Mineral Stones effectively remove sweat, improve hair loss, dry scalp, remove itching and dandruff, make your skin and hair smoother and softer, and enjoy a relaxing spa experience in your own bathroom.

PP Cotton Handle Filter
Material quality: polyester fiber (PP material)
Replacement time: 3 to 6 months, depending on the water quality, normally 10000L.
Function: Filter the colloidal impurities, mud, rust, insect eggs, organic pollutants, etc.
Filtration Rate: 5 Micron
The PP cotton filter element is made of polypropylene resin as a raw material to make fibers, which are bonded by the fiber itself. The structure of the filter element is a structure with thick outer layer fibers, thin inner layer fibers, a loose outer layer, and a tight inner layer. Filtering from outside to inside, the closer to the inner layer of the filter element, the smaller the pore size, the higher the filtration accuracy.
This unique gradient deep filtration has formed a three-dimensional filter residue effect, which can be multi-layered and deep structure, with large dirt holding capacity; PP melt blown filter element is strong when the filter inlet and outlet pressure difference is 0.4Mpa, the filtration flow rate is large, and the pressure difference is small, The filter core is not deformed; It integrates surface, deep, coarse and fine filtration; It has the characteristics of large flow, corrosion resistance, high pressure. It is used to block large particles such as rust, sand, and insect eggs in the water.

Replacement
Talking about the replacement, Because the PP cotton filter element belongs to the first-stage filter element when shower, more than 80% of the impurities will be filtered out at this stage, and the more impurities are filtered, the easier the filter element will be blocked. Therefore, the life of the PP cotton filter element is very short. The filter element may need to be replaced for more than two months in areas with poor water quality, and the longest area with better water quality will not exceed six months. So if you buy a shower head with a PP cotton filter element, in order to avoid secondary pollution, it is recommended that you replace the filter core every 3-6 months or so.